Comex has made known that tomorrow they will update JailbreakMe 3.0 to fix some issue related with installing some packages. The update will also include issue with Camera Connection Kit.

Comex tweet that they don’t understand the issue where Cydia starts to install and at instant disappears. If you are interested in updating the software then you can get it from Cydia but your device must already be jailbroken.

When update you with more information when available, so keep reading.

Read more

[Via iClarified]

Comex to Update JailbreakMe Tomorrow Include Fix is a post from: The Apple Bites

qTweeter app is perfect for people who are more into Social Networking sites like Twitter and Facebook. This jailbreak app is available on Cydia that was briefly demoed by Saurik, developer of Cydia in his interview with Robert Scoble.

why you should jailbreak your iPhone.

I highly recommended this qTweeter app because it allows the users to update Twitter and Facebook status at once rather than doing it separately and it also saves users the trouble of exiting the app that they are currently using as they can launch qTweeter by simply sliding your finger down the status bar.

Features of qTweeter:
The app allows you to update Facebook and Twitter at once and update your status on top of any app without the need to close the pervious application. Upload images and video to Facebook and also add location and update profile location.

Here you can watch the demo video of qTweeter in action below:

qTweeter is available on Cydia for $3.99. You can also get a free trial so that you can install it to check it out first before buying it.

qTweeter: Update Twitter & Facebook at Once ( Recommended Jailbreak App) is a post from: The Apple Bites

Tags:

• cydia tweak to update facebook and twitter simultaneously

For Windows user, you can follow this guide to jailbreak the latest version of iPhone OS and enjoy the new features.

Same as the jailbreak guide for Mac user, please read through the below notes before taking action to jailbreak your iPhone:

• This jailbreak guide is designed for Windows user. For Mac user, you can refer to this jailbreak guide.
• You can use this guide to jailbreak & unlock iPhone 2G (the 1st generation iPhone)
• You can use this guide to jailbreak iPhone 3G (Please note jailbreak only. You’ll need to use ultrasn0w to unlock it.)
• If you’re using lower version of firmware (e.g. 1.1, 2.0, 2.1 or 2.2), you can also follow the jailbreak procedures to upgrade the firmware to 3.0. But please note that you’ll have to re-install all the Cydia applications after upgrade. And, at the time I write this post, not all Cydia applications (e.g. Backgrounder, iRealSMS, MySMS, BossTool, Quickgold) are compatible with iPhone 3.0. So, if you have any cydia applications that you rely on, please ensure its compatibility before upgrading.
• For iPhone 3GS user, please do not use Redsn0w to jailbreak your new iPhone. Presently, there is no way to jailbreak iPhone 3GS.

Now, let’s get started.

To jailbreak iPhone 3.0 OS on Windows, we’ll use Redsn0w to jailbreak your iPhone. Developed by iPhone Dev Team, Redsn0w is a replacement of QuickPwn to jailbreak iPhone 3.0. The jailbreak process is very straightforward that any iPhone owner can manage the jailbreak.

Preparation for Jailbreak & Unlock

1. First, make sure you have upgraded to iTunes version 8.2 and backup your iPhone data by synchronizing it with iTunes.

Tip: If you’re upgrading the iPhone from older version of firmware, make sure you sync the iPhone with iTunes. This ensures all your SMS, contacts and applications can be restored after the firmware upgrade.

2. Download Redsn0w 0.7.2 (or download from here), Bootloader 3.9 & 4.6 and iPhone firmware 3.0 (2G / 3G). Save them all in the same folder. And unzip redsn0w-win_0.7.2.zip. So make sure you have all the files in place before proceeding to next step.

Installing iPhone 3.0 OS via iTunes

3. Next, connect your iPhone to your computer via USB cable and launch iTunes. Select your iPhone in iTunes.

4. Now, hold the SHIFT key and click the “Restore” button. iTunes will launch a file dialog for you to select the firmware file. Locate the “iPhone1,1_3.0_7A341_Restore.ipsw” for iPhone 2G or “iPhone1,2_3.0_7A341_Restore.ipsw” for iPhone 3G that you have downloaded in step 2 and click “Open”.

5. iTunes will then restore your iPhone with firmware 3.0 (or what so called iPhone 3.0 OS). Keep your iPhone connected, don’t touch it and wait until the process completes.

Jailbreaking with Redsn0w

6. Now, your iPhone should be completely restored to firmware 3.0. But it’s not activated right now as you can see from iTunes.

So, what you’re going to do next is to use Redsn0w to activate and jailbreak it. But before proceeding to next step, please power off your iPhone (but keep it connected with USB cable).

7. Next, launch Redsn0w to start jailbreak & unlock.

8. Once launched, click the “Browse” button and select the firmware file that you have downloaded. For iPhone 2G, please locate the “iPhone1,1_3.0_7A341_Restore.ipsw”. And, for iPhone 3G, please use “iPhone1,2_3.0_7A341_Restore.ipsw”

Redsn0w will then verify the firmware file. If it’s correct, redsn0w will show the message “IPSW successfully identified”. Then click “Next” button to continue.

9. Next, you’ll need to select the jailbreak option. For iPhone 2G, please select both “Install Cydia” and “Unlock” option. For iPhone 3G, please only select “Install Cydia” option (actually the “Unlock” option is not available for iPhone 3G). Click “Next” button to proceed.

10. Please select the bootloader files that you have downloaded in step 2.

Note: This step is for iPhone 2G only. For iPhone 3G user, this step is skipped.

Put iPhone into DFU Mode

11. Next, redsn0w will instruct you to put your iPhone into DFU mode. Ensure your iPhone is connected (via USB) and it’s turned OFF. If you’re ready, click “Next” to continue.

12. Follow the instructions to put your iPhone into DFU mode.

Tip: You may not be able to put the iPhone into DFU mode for the first trial. Don’t worry. Simply click the “Back” button to go back and try to follow the instructions again. Redsn0w will start the jailbreak process only if it detects your iPhone is properly put into DFU mode.

13. If you have successfully put the iPhone into DFU mode, redsn0w will automatically start the jailbreak process.

14. While jailbreaking, your iPhone will show downloading jailbreak data, flashing NOR, etc. And, just don’t touch your iPhone and keep waiting.

15. Once completed, redsn0w will let you know the jailbreak process is successful. Your iPhone will be restarted and automatically launch BootNeuter to perform unlock. This process will take 3-5 minutes to complete. Be patient. When complete, your iPhone will be rebooted.

16. Congratulation, you’ve completed the jailbreak process for iPhone 3.0 OS. As you can see from the home screen, you now get the new Voice memo application, which is introduced in iPhone 3.0.

17. Lastly, sync back your backup data with iTunes and restore all your contacts & SMS.

Let us know how was jailbreaking done, comment here.

Complete Guide: Jailbreak iPhone 3.0 using Redsn0w for iPhone 2G & 3G for Windows is a post from: The Apple Bites

This is a compriehnsive step-by-step guide which lets you Jailbreak and Unlock your iPhone 3.0

What you need:  Your iPhone, your Mac or PC, iPhone and the USB adapter cable

Note: This works well for iPhone 2G and 3G. If you wish to unlock and Jainbreak 3GS, you would have to wait.

Let’s Start!

Step 1)

You need to jailbreak it first, and that requires redsn0w, a Mac/PC jailbreaking program. Download the official redsnow torrent files HERE, then download redsn0w via your Bittorrent client of choice. Back up your iPhone to your computer before moving forward.

Step 2)

Open redsn0w. Follow its instructions to select your .ipsw (iPhone firmware) file. On Macs, you can find the file at Home Folder/Library/iTunes/iPhone Software Updates. Or just download a new one from HERE. Once you’ve found your .ipsw, move on.

Step 3)

Redsn0w will ask if you want to install Cydia or Icy or Both. (These are apps that can load programs on jailbroken phones and will be needed to unlock the phone later.) JUST INSTALL CYDIA, NOT BOTH. Once the .ipsw file is patched, make sure to plug in your iPhone then turn it off while still plugged. When you see the screen “Click NEXT when your iPhone is both OFF and plugged in…” go on to the next step.

Step 4)

Now you need to put your phone into DFU mode to load the patched firmware. You’ll hold the top power button for two seconds, then hold the Home button with it for 10. Then you’ll release the top button and just hold Home for 30 or so. If you mess up you can just try again, but you need to pay attention, so make sure you’re holding your phone and watching the computer screen when you hit “next.” Redsn0w will guide you through the pattern of holding the top and home buttons in timed succession. If you’re successful, redsn0w will inform you that your phone is being jailbroken and you can stop holding the Home button. If you’re not, redsn0w will reset the process and you’ll probably need to manually restart your iPhone.

Step 5)

Wait as the jailbroken firmware loads onto your iPhone. (You’ll see a disk drive on the phone’s screen, then this cute pineapple graphic as it installs.) After a few minutes, the phone will reboot just as it does with official firmware. Congratulations, your phone is jailbroken! Most of you are done—just load Cydia (which is now an app on your iPhone) and search for apps you’d like to install. Others need to continue this tutorial for the unlock.

Step 6)

If you want to unlock your original or 3G iPhone so it can take a T-Mobile or international SIM, follow these next steps. You’re done with your computer, so make sure your iPhone is on a Wi-Fi connection. We’re going to use Cydia to download and install ultrasn0w, which unlocks your iPhone.

Step 7)

Cydia will first ask what kind of interface you’d like. I’m no hacker, so I chose the graphical view. Then Cydia will want to download at least 2 Essential Upgrades. Let it by choosing “complete upgrade.” If Cydia’s successful, you’ll see a bunch of install code and the option to “Close Cydia (Restart).” Hit that button. (Note: If you are getting errors in this step, it may be because you installed both Cydia and Icy. If you did that, restore your iPhone with official 3.0 firmware via iTunes and start the process over.)

Step 8 )

Reopen Cydia. Go to Manage -> Sources -> Edit – > Add and then enter “repo666.ultrasn0w.com” in the text field. This should add ultrasn0w as a Cydia source so that you can download the ultrasn0w software. Choose to return to Cydia and then click “Done”.

Step 9)

Click the repo666.ultrasn0w.com listing under your Sources. Click repo666.ultrasn0w.com again at the next screen (redundant, we know). Then click Install. You’ll see a black screen with some text and, after a few seconds, it should read “Complete”. Reboot your phone with your new SIM.

Congratulations, your iPhone is unlocked!

Please comment below if you encounter any problem.

Step By Step Guide to Jailbreak and unlock iPhone 3.0 is a post from: The Apple Bites